3 Function
specification
3/5
3.3
Other setting options
In addition to the settings already described, other settings can be made using the T 2.10
or T 2.15. These settings are described in detail in the PICOTIG PRO mode operating
instructions.
The following values are set at the factory.
3.3.1
TIG welding parameters
Parameters Factory
setting
Main current
100A
Secondary current
49%
Down-slope time
0.1sec
End-crater current
30%
Gas post-flow time
5.0sec
Tungsten electrode diameter
2.4mm
AC balance
-10%
AC frequency
80Hz
Gas pre-flow time
0.2sec
Ignition current
20%
Up-slope time
0.3sec
Alternating current waveform
square
3.3.2
MMA welding parameters
Parameters Factory
setting
Main current
100A
Hotstart current
150%
Hotstart time
0.1sec
