Design and function
MIG/MAG welding
34
099-005545-EW501
17.12.2020
5.2.4 Welding task selection
The settings for the respective welding parameters are defined by the different JOBs. The right JOB can
be determined quickly with the JOB list
> see 11.1 chapter
.
3s
Figure 5-14
Validity of the settings.
Spot time, pause time and wire feed speed settings apply to all JOBs. Throttling effect/dynamics,
gas post-flow time, gas pre-flow time and wire burn-back correction are stored for each JOB
individually.
Changes are stored permanently in the JOB that is currently selected.
If required, these parameter values can be reset to the factory settings
> see 7.3 chapter
.
5.2.5 Welding power (operating point)
5.2.5.1 Selecting the welding parameter display mode
The operating point (welding power) can be displayed or set as the welding current, material thickness or
wire speed.
Figure 5-15
5.2.5.2 Operating point setting using material thickness
Figure 5-16
