Machine description – quick overview
Machine control – Operating elements
20
099-005545-EW501
17.12.2020
4.3.1 Welding data display
Figure 4-4
The push-button for the welding parameter display mode is next to the display.
Each time the push-button is pressed the display changes to the next parameter. After the last parameter
is reached the display continues with the first parameter.
The display shows:
• Nominal values (before welding)
• Actual values (during welding)
• Hold values (after welding)
MIG/MAG
Parameter
Nominal values
Actual values
Hold values
Welding current
/
[1]
Material thickness
Wire feed speed
Welding voltage
[1] traditional MIG/MAG
TIG/MMA
Parameter
Nominal values
Actual values
Hold values
Welding current
Welding voltage
After the welding, the display switches form hold values to nominal values by
• pressing the push-buttons or turning the rotary knobs of the control
• waiting for about 5 seconds
4.3.1.1 Polarity setting
The polarity setting displays the polarity required for the selected JOB on the machine con-
trol
> see 4.3 chapter
. The required polarity can then be set with the polarity selection plug.
