Commissioning
PICO 260; 300 CEL PWS
Item No.: 099-002032-EWM01
27
6.8
PICO 260; 300 CEL PWS
1
2
3
4
Figure 6-3
Item Symbol Description
0
1
Connection socket, 19-pole
Remote control connection
2
Connection socket, electrode holder
The welding current polarity (“+” or “-”) are based on the setting of the “Welding current
polarity changeover switch”.
3
Welding current potential changeover switch
The changeover switch is used to switch over the welding current polarity (“+” or “-” ) of
the electrode holder and workpiece lead connection sockets.
=
Welding current polarity “+” on connection socket
.
=
Welding current polarity “-” on connection socket
.
4
Connection socket, workpiece lead
The welding current polarity (“+” or “-”) are based on the setting of the “Welding current
polarity changeover switch".
6.8.1.1
Pole reversal changeover switch
This allows the welding current polarity (+/-) to be changed without unplugging the electrode holder or
workpiece leads.
The polarity cannot be changed during welding!
The polarity can also be changed over to an appropriate remote control with pole reversal switch.
