Functional characteristics
Welding data display
18
Item No.: 099-002032-EWM01
Item Symbol Description
0
10
AMP
VOLT
“Display switching” button
AMP
Welding current display
VOLT
Welding voltage display
11
“Arcforce” button (welding characteristics) according to electrode type
12
“Select welding parameters” button
This button is used to select the welding parameters depending on the welding process
and operating mode used.
5.2
Welding data display
The welding data display shows all relevant welding parameters and their values as selected. To the right
of the display on the control is an "arrow key" for selecting between welding current and welding voltage.
Further parameter displays are described later on in this chapter.
5.3
MMA welding
5.3.1
Selecting MMA welding
Control element Action
Result
Display
x x
MMA welding signal light
lights up
The last welding current set in this
procedure is displayed
AMP
sec
Main current setting
Welding current is displayed
5.3.2
Selecting the electrode type – Arcforce (welding characteristics)
During the welding process, arcforce prevents the electrode sticking in the weld pool with
increases in current. This makes it easier to weld large-drop melting electrode types at low
current strengths with a short arc in particular.
The electrode types used must be selected on the machine control to achieve the optimum
welding properties of the electrode types.
Control element Action
Result
Display
x x
The corresponding signal light
displays the selection.
-
