EWM Phoenix Expert drive 4L M3.70, Руководство по эксплуатации

Страница: 21 / 101

Machine description
– quick overview
Machine control
– Operating elements
099-004846-EW501
8.01.2014
21
Item Symbol Description 0
1 Lid (see chap. "Machine control
– concealed operating elements")
2
Push-button, parameter selection left/power-saving mode
Welding current
Material thickness
Wire feed speed
After welding, the values used last are shown from the main program. The
signal light is illuminated.
Enter power-saving mode by pressing the push-button for a longer time.
3
Display, left
Welding current, material thickness, wire speed, hold values
4
Welding parameter setting, rotary dial
For setting the welding performance and for setting other welding parameters.
5
Select operating mode button
Non-latched
Latched
Signal light lights up in green: Special non-latched
Signal light lights up in red: MIG spot welding
Special latched
6
Dynamics/choke effect button
Arc harder and narrower
Arc softer and wider
7
Button, Select welding type
MIG/MAG standard welding
MIG/MAG pulse arc welding
8
Arc length correction/selection of welding program, rotary dial
• Correction of the arc length from -9.9 V to +9.9 V.
• Selection of welding programs 0 to 15 (not possible if accessory components, such
as program torches, are connected).
9
Display, right
Welding voltage, program number
10
Button, Parameter selection (right)
VOLT Welding voltage
PROG Program number
kW Welding performance display
Gas flow quantity (optional)