Functional characteristics
Transport and installation
20
099-008268-EW501
21.02.2022
Item Symbol Description
0
2
Coolant filter sieve
3
Coolant tank
> see 5.3.3 chapter
4
"Min" mark
Minimum coolant level
• Unscrew and remove the coolant tank sealing cover.
• Check filter sieve insert for dirt, clean if necessary and reinsert into position.
• Top up coolant to the filter sieve insert, close sealing cover again.
The level of coolant must never fall below the “min” mark.
If there is less coolant in the coolant tank than the minimum required you may need to vent the
coolant circuit. In this case the welding machine will automatically shut down the coolant pump
and signal an error,
> see 9.2 chapter
.
