Ewellix CPMA Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 44

9
2 .0 S afety
9
2.8 Manufacturer’s
declaration of EMC
compliance
IEC/EN 60601-1-2:2007
Medical Electrical Equipment, Part 1-2:
General requirements for safety
Additional standard: Electromagnetic
Compatibility-requirements and tests
Guidance and manufacturer’s declaration – electromagnetic emissions (table 1 according IEC 60601-1-2)
The telescopic pillars CPMA and CPMB are intended for use in the electromagnetic environment specified below.
The customer or user of the telescopic pillars should ensure that they are used in such an environment.
Emissions test Compliance Electromagnetic environment – guidance
RF emissions CISPR 11 Group 1
The telescopic pillars CPMA and CPMB use only RF energy for their internal
function. Therefore, their RF emissions are very low and not likely to cause any
interference with nearby electronic equipment.
RF emission CISPR 11 Class B
CPMA1-2xxxxxx-xxx
CPMB1-2xxxxxx-xxx
RF emission CISPR 11 Class A
CPMA1-1xxxxxx-xxx
CPMB1-1xxxxxx-xxx
CPMA1-xxxxxxx-xxx with
ZDV-348220-002 and ZDV-348221-002
CPMB1-xxxxxxx-xxx with
ZDV-348220-002 and ZDV-348221-002
The combination of the telescopic pillar CPMA1-xxxxxxx-xxx or CPMB1-
xxxxxxx-xxx either with ZDV-348220-002 or with
ZDV-348221-002 do not exceed the RF emission class of the combination of
the same telescopic pillar with ZDV-348220-002
and ZDV-348221-002.
Harmonic emission
IEC 61000-3-2
Class A
The telescopic pillars CPMA and CPMB are suitable for use in all non-domestic
establishments, and in domestic establishments and those directly connected
to the public low-voltage power supply network that supplies buildings used
for domestic purposes.
Voltage fluctuations/ flicker
emissions
IEC 61000-3-3
Complies