Ewellix CPMA Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 44

19
5.0 Tra n s p or t, p a ck a gin g an d s tora ge
5.0 Transport, packaging and
storage
5.1 Safety information for
transportation
CAUTION
Damage due to improper transport
Significant damage to the device may occur as a result of
improper transport.
Therefore:
• Proceed carefully during delivery and unloading of the packaged
items, as well as during transport to final destination. Comply with
the symbols and information shown on the packaging.
• Do not remove the telescopic pillar from its packaging until just
before installation.
• Note storage requirements for return transport of the device to
the manufacturer (⮑ Storage, page 20).
5.2 Transport inspection
The telescopic pillar is delivered as one packaged unit in a
box or on pallets.
Check the delivery immediately upon receipt, for complete-
ness and any signs of damage incurred during transport.
Check completeness of delivery for:
• A complete telescopic pillar unit, with all packaged parts
present.
• Any signs of damage to the plastic casing, such as cracks.
If evident, protection in accordance with rated IP class is
no longer guaranteed and the telescopic pillar must be re-
turned to the manufacturer.
If exterior transport damage is evident:
• Do not accept delivery or do so only under agreed conditions.
• Record scope of damage on the transport documents or
bill of delivery of the shipping company.
• Initiate complaint.
NOTE
Report any damage as soon as possible, as damage claims can
only be submitted within the transporter’s applicable complaint
period.
5.3 Return to the
manufacturer
If device is damaged, arrange for return transport as follows:
Dismantle the device if necessary (⮑ Dismantling,
page 33).
Pack device in its original packaging. Follow storage condi-
tions (⮑ Storage, page 20).
1. Send to manufacturer. Contact Ewellix service to obtain
a shipment address.
5.4 Packaging
Requirements:
All parts to be packaged appropriately for anticipated trans-
port conditions, using only environmentally-friendly
materials.
The packaging is designed to protect the individual compo-
nents from damage caused by transport, corrosion and
other risk factors until they are ready for installation. Only re-
move packaging shortly before installation. The packaging
should not be destroyed, but kept for possible return ship-
ment to the manufacturer (⮑ Return to the manufacturer,
page 19).
If the packaging is to be disposed of following satisfactory
delivery, please note and adhere to the following:
NOTE
Packaging material consists of valuable raw materials, much of
which can effectively be recycled and reused.
Therefore:
• Dispose of packaging material in an environmentally correct way.
• Comply with locally applicable disposal regulations.