Ewellix CLSM-150-B A Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 20 / 30

20
CL S M
7.5 Action after use
It is important to prepare and clean up the device for re-
start. If the device is no longer used, power has to be dis-
connected from the device and system.
Always evaluate the checklist and record the log.
7.6 Installation instruction
CLSM inline kit
7.6.1 Adapter kit
This adapter kit is to install a motor with an axially designed
shaft (see 7.4.2 Recommended motors) to the CLSM linear
module.
7.6.2 Recommended motors
In principle, all motors that are equipped with an axial shaft
may be fitted with the CLSM linear module.
It is important that the rated power of the motors does not
exceed the permitted value.
Ewellix recommends the following servo motors:
Linear unit CLSM-92-T CLSM-92-B CLSM-150-B…A CLSM-150-B…P CLSM-150-B…S
Screw Lead Screw Ball Screw Ball Screw Ball Screw Ball Screw
14x03 12x05/10/20 20x05/10/20 20x05/10/20 20x05/10/20
Motor 1FK7015 1FK7022 1F7034 1FK7044 –
0.035 Nm 0.85 Nm 1,60 Nm 4,00 Nm
6000 r/min 6000 r/min 6000 r/min 4500 r/min
Lead & Ball screw Linear unit CLSM-150-P…A
Screw –
Motor 1FK7015/1FK7022/1F7034/1FK7044
Lead & Ball screw CLSM-150-L…A
Screw –
Motor
SGLFW – 3SA 120AP
– 3SA 120AP
Performance overview of linear module - Lead & Ball screw
Performance overview of linear module Performance overview of linear module
WARNING
For safe and correct operation and to prevent injury, do not
disassemble the linear module.