5
Assembling the Appliance
•
Insert the handle into the aperture at the top
of the body until the metal securing knob is
located (Fig.3).
•
Polisher base can be removed from the
appliance, press release clip (A) and pull
straight out (Fig.2).
Changing the pads and plates on your
product
•
Make sure machine is not plugged in before
fitting pads.
•
Note the orientation of the drive hubs (Fig.4).
•
•
Press the plate down to clip into place (Fig.6).
•
Always use two plates of the same type, i.e.
not 1 brush and 1 pad (Fig.7).
•
Simply pull the plates off to remove and
change.
F
i
g.3
F
i
g.4
F
i
g.5
F
i
g.6
F
i
g.7
F
i
g.2
F
i
g.1
Place the required hook & looped-plate or
brush plateover the hub and rotate
until the shape lines up (Fig.5).
•
Adjust the handle to suit your height (Fig.1).
EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 5
