EWA CORELIS PXIE-1149.1/4E Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 41

EWA CORELIS PXIE-1149.1/4E Скачать руководство пользователя страница 4

ii

EXCLUSIVE REMEDIES

THE REMEDIES CONTAINED HEREIN ARE THE CUSTOMER'S SOLE AND

EXCLUSIVE REMEDIES. CORELIS SHALL NOT BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER
BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.
Product maintenance agreements and other customer assistance agreements are available for Corelis
products. For assistance, contact your nearest Corelis Sales and Service Office.

RETURN POLICY

No items returned to CORELIS for warranty, service, or any other reason shall be accepted unless
first authorized by CORELIS, either directly or through its authorized sales representatives. All

returned items must be shipped pre-paid and clearly display a Returned Merchandise Authorization
(RMA) number on the shipping carton. Freight-collect items will NOT be accepted. Customers or

authorized sales representatives must first contact CORELIS with notice of request for return of
merchandise. RMA's can only originate from CORELIS. If authorization is granted, an RMA

number will be forwarded to the customer either directly or through its authorized sales
representative.

CONTACT INFORMATION

For sales inquiries, please contact

[email protected]

For any support related questions, please enter a support request at

www.corelis.com/support

or

email

[email protected]

For more information about other products and services that Corelis offers, please visit

www.corelis.com

«
...
2
3
4
5
6
...
»

Содержание CORELIS PXIE-1149.1/4E










































Отзывы:

Нет отзывов