3704-IG-001 Installation and User Manual
Page 16
Wall-Mounting 3704 EVSEs
Single Wall-Mount
NOTE: In order to remain ADA-compliant, from the user’s perspective, the 3704’s Data Router MUST be no more than 48
inches from the ground when mounted to a wall (Figure 1B).
There are 4 mounting-screw holes in the rear frame of the 3704 EVSE, two at the top and two at the bottom (Figure 8A).
1.
Using the mounting hole pattern depicted (Figure 5), drill pilot holes if necessary, and attach the 3704 EVSE to the
wall. Do not fully tighten the screws.
2.
Using a level, ensure the EVSE is level and plumb on all sides. Securely tighten all mounting screws.
NOTE – Conduit(s) enters through the bottom-center, or right conduit-access hole (Figure 7A).
3.
Proceed to Wiring the EVSE for Power.
Figure 8A
Top
Bottom
EVSE Rear Mounting Plate
