5.6.
Audio Paths Tab
In this tab you can configure the audio matrix inputs. The first 16 paths are the de-embedded audio
channels from the video path de-embedders. The input selection is disabled because this is configured
in the Video Paths tab.
The lower 16 paths are the separate ST2110-30 audio input streams, which are configured in the 'IP
Audio I/O' tab.
1.
Backup
switch settings. Clicking this button will open a pop-up in which the backup mode can be
set.
This is the same backup mode which is used for the video paths.
When the backup mode is set to Off, this button will indicate a
icon. When the mode is set to On,
this button will indicate a
icon and the processing path’s input will switch to the backup input
when the main input fails. When the mode is set to BackUp Fail, this button will indicate a
icon and
the processing path’s input will switch to the backup input until the main input is back again. In the
Backup settings pop-up, you can also force all processing paths to either use the Main input, by
setting the Input Selection to
Main
, or the backup input, by setting the Input Selection to
Backup
. In
the Video Paths tab, this is indicated by a lock icon above the Main or the Backup drop-down box
columns.
2.
Deembedded Audio
settings. All settings displayed in this groupbox represent the video processing
paths on the Video Paths tab, to indicate which audio from which of the SDI or IP inputs is being
deembedded. This is configured in the Video Paths tab. Therefore you cannot change the main and
backup inputs from this tab.
3.
De-emb
. This disabled button only indicates the deembedding process on this video path.
INSTALLATION AND OPERATION MANUAL
Neuron COMPRESS | 5. Graphical User Interface |
25
