Powering Up
On powering up the Neuron frame with processing module(s) for the first time, all settings of the
processing module(s) will be set to the factory default state. After initialization, the card will be visible in
Cerebrum/Cortex.
Installing EVS Cerebrum/Cortex
To configure Neuron, Cerebrum or Cortex is required. This software needs to be installed on a computer
connected to the same network as Neuron and needs to meet the minimum Cerebrum/Cortex system
requirements.
•
Download Cerebrum/Cortex from the EVS website (https://mi-sftp.evs.com/).
•
Follow the on-screen installation instructions once you run the setup application on the computer.
For a detailed description, please refer to the Cerebrum/Cortex installation guide. Should you
encounter any difficulties, please contact EVS support.
•
Once the installation is completed, please check that you have the latest firmware and interface files,
cf. "Firmware Upload and Update Procedure" on page 33 for more details. You will then be able to
run the Cerebrum.exe or Cortex.exe application.
8
| February 2022 | Issue 4.9.C
