In the pop-up, you can either fill in an identifier string (pressing
Enter
after typing or pasting will
immediately switch the input, without having to use
TAKE
) or specify an SDP file (after clicking on
the
SDP
button). Alternatively, you can fill in the IP Address, Port number, Media Type and Format
fields, then select
TAKE
.
When filling in an IP address, port and media type instead of an Identifier string, the input will
only change when the
TAKE
button is clicked.
6.
Pattern
settings. In the dialog which this button opens, the following input options can be
configured:
Setting
Options
Video Format
2160p50, 2160p59.94, 1080p50, 1080p59.94, 1080i50,
1080i59.94, 720p50, 720p59.94, SD625, SD525
Mode
Black, Colorbar 75%, Colorbar 100%, Colorbar Comp,
Zoneplate
Border Enable
Off, On
Border Size
2..5..10
Border Color
White, Black, Gray, Red, Blue, Green
Zoneplate Speed
0..5..15
7.
Backup
switch settings. Clicking this button will open a pop-up in which the backup mode can be
set. When the backup mode is set to Off, this button will indicate a
icon. When the mode is set to
On, this button will indicate a
icon, the processing path’s input will switch to the backup input
when the main input fails. When the mode is set to BackUp Fail this button will indicate a
icon, the
processing path’s input will switch to the back-up input until the main input is back again. In the
Backup settings pop-up you can also force all processing paths to either use the Main input, by
setting the Input Selection to MAIN, or the backup input, by setting the Input Selection to BACKUP. In
the video paths tab, this is indicated by a lock icon above the main or the backup drop-down box
columns.
INSTALLATION AND OPERATION MANUAL
Neuron COMPRESS | 5. Graphical User Interface |
19
