Adding Neuron to Cerebrum/Cortex
With Cerebrum/Cortex running on a computer connected to Neuron, follow these steps to discover the
Neuron processing boards and to configure it.
•
When Cerebrum/Cortex is running, select
Network
and then
Force Network Refresh
. Make sure
that the PC’s IP address is also set, to automatically get an IP address given by the same DHCP
server as Neuron.
•
The Neuron frame and boards will appear in the System view. If the frame is not properly discovered,
please contact EVS support.
•
The Cerebrum/Cortex device view should now display the Neuron graphical user interface, which
allows you to configure the processing module(s).
INSTALLATION AND OPERATION MANUAL
Neuron COMPRESS | 3. Quick Start |
9
