EVS Broadcast Equipment SA
21
NoWSS/VI_prstA
With this setting you can set to which preset the card should jump
channel A, when no WSS or VI information is found. Can be any
preset between
1
and
16
or
Hold
(holds current active preset). By
default it is set to
Hold
.
Input_Loss_A
Here you can set what the output of channel A should be when the
input is lost. Can be
Freeze
,
Colorbar
,
Zoneplate
,
Black
,
Grey
or
Green
.
UP-CONV
Up_CtrlA
With this item you select how the presets for Channel A in up
converter mode are controlled: Manually (
manual
), via GPI-triggers
(
GPI
,
GPI-A
,
GPI-B
or
GPI-C
) or via changes of the SD Aspect
Ratio (
SD-AR
). By default it is set to
Manual
.
Up_Prst_actA
With this item you can manually change the currently active preset of
channel A in up converter mode. Can be any preset between 1 and 16.
By default it is set to 1. All menu settings that are preceded with a
‘
#Up
‘-prefix are part of the preset.
UP_Prst_editA
Here you can select which of the 16 selectable presets you want to edit
for Channel A in up converter mode. Changing this will not change the
active preset, unless the currently active preset is the same you are
going to edit. All menu settings that are preceded with a ‘
#Up
‘-prefix
are part of the preset.