EVS Broadcast Equipment SA
17
#V-delayA
V-Delay
setting allows adjustment of the vertical phase of the output
signal with respect to the selected reference input.
The
V-Delay
setting gives a delay in addition to the reference timing.
For example: if the
V-Delay
is set to 10 TV HD lines, the output
signal will be delayed by reference 10 TV HD lines. The
signal is delayed (advanced) with respect to the phase of the reference
signal. The available range is from 0 to a maximum of 1124 lines
(dependant on I/O format). The default setting is
0ln
. The preset
master for this is
Out-Frmt
, hence the ‘#’-prefix.
#H-delayA
The H-Delay setting allows adjustment of the Horizontal phase of the
output signal with respect to the selected reference input.
The H-Delay setting gives a delay in addition to the reference timing.
For example: if the H-Delay is set to 10 pixels, the output signal will be
delayed by reference 10 pixels. The signal is delayed
(advanced) with respect to the phase of the reference signal. The
available range is from 0 to a maximum of 5124 pixels (dependant on
I/O format). The default setting is
0px
. The preset master for this is
Out-Frmt
, hence the ‘#’-prefix.
#Freeze_A
Freeze
enables the capture of one Video Frame. The settings of
Freeze
are
On
or
Off
. The default setting is
Off
.
#HD_SD_LPF_A ~
#K4_down_LPF_A
Here you can set the horizontal and vertical video low-pass filter for
channel A. There is a separate lowpass filter settings for 4K
downconvert mode (
#K4_down_LPF_A
). These are the possible
settings:
■
Off
: the normal broadband filters will be used when the card is
converting. A 64 taps brick wall type horizontal filter: