INSTALLATION AND CONFIGURATION MANUAL
GXG400 – GXG410
14
5 Settings Menu
Introduction
The settings menu displays the current state of each GXG4x0 setting
and allows you to change or adjust it. Settings can be changed using
the front panel of the Synapse frame (SFR18, SFR08 or SFR04) or
with Cortex. Also the SCP08 control can be used. Please refer to
chapter 3 for information on the Synapse front panel control and
Cortex.
Note:
All items preceded with a #-sign are part of the presets.
HDMI
HDMI1-Format ~
HDMI2-Format
Here you select the output format of the corresponding HDMI output
module. Possible modes are
■
RGB444
(default)
■
YCrCb422
■
YCrCb444
HDMI1-DVI-Mode
~ HDMI2-DVI-
Mode
With these settings you set the corresponding HDMI output to either
DVI-Mode
or
HDMI-Mode
. Default is
DVI-Mode
.
HDMI1-GrpA-Sel ~
HDMI2-GrpA-Sel
The HDMI outputs can contain 2 groups of audio. Here you select
which input group should be in group A of the corresponding HDMI
output. Can be group 1, 2 3 or 4. Default is Group 1.
HDMI1-GrpB-Sel ~
HDMI2-GrpB-Sel
The HDMI outputs can contain 2 groups of audio. Here you select
which input group should be in group B of the corresponding HDMI
output. Can be group 1, 2 3 or 4. Default is Group 2.
HDMI1-Mute-All ~
HDMI2-Mute-All
Here you can mute all audio on the corresponding HDMI output. Off
means no audio mute. On means all audio is muted. Default is off.