GX server – Version 1.10 – User Manual
EVS Broadcast Equipment – September 2012
Issue
1.10.D
57
Loop Point Field
The
Loop Point
field allows users to specify the timecode in the video raw material at
which the loop will start. The loop will always be performed from that point to the Video
OUT
field.
The GX server will perform a nested loop if the loop point is set to anything other than the
IN frame.
Loop Recurrence Field
The
Loop Recurrence
field allows users to specify how many times the loop defined in
the GX clip will be performed during playout.
When a loop recurrence is defined, the total duration of the GX clip specified below the
video display is automatically adapted.
Note
You will find an example on loops in the section 5.5.9 'GX Clip Duration and
Timecodes', on page 63.
5.5.6
Audio Settings in the Edit GX Clips
Window
Note about the examples
The frame rate used in the examples below is 50i (25 f/sec).
The schemas in the examples show the field values as defined on the raw
materials, and the corresponding TC values of the GX clip that will be displayed
to external controllers.
(Audio) Association Field
The audio
Association
field allows you to select the audio file to associate to the video
raw material.
The audio files available in the drop-down field are:
•
Audio files already copied to the Raw Materials drive
Содержание GX
