EVS GFS010, Руководство по установке и настройке

Страница: 34 / 42

INSTALLATION AND CONFIGURATION MANUAL
GFS010 – HFS010 – SFS010
32
recovery of processed signals.
The
ON
setting is recommended if the BHX-backpanel is used in
combination with synapse cards:
 which have a short initialization time, or
 which have a delayed trigger-signal onboard.
“
Direct Backpanel Switchover ” dipswitch set to
OFF
(default) :
Will make the BHX-backpanel switch after about 15 seconds from
the moment the BHX-backpanel detects the trigger signal from the
connected synapse card. This setting will allow more time for
complex synapse cards to finish initialization and stabilize proper
signal processing before the backpanel switches over to the
processed signal.
The
OFF
setting is recommended if the BHX-backpanel is used in
combination with synapse cards:

which are more complex and thus need longer initialization
time and do NOT have a delayed trigger-signal onboard.
Note: In case of power failure or when the synapse board is
extracted from the frame the bypass is immediately active.