EVS Broadcast Equipment SA
15
INSERTER
This card can insert several data values in the VBI of the outputs.
With the following settings you can choose what you want to insert.
Timecode_Inp
With this card it is possible to copy the embedded timecode
information of either input
SDI-1
or input
SDI-2
to the output.
With this setting you select which input you want to use, or switch
the timecode inserting
Off
(default).
VITC_Ln_In
With this setting you can select what line of the input you want to
copy the VITC data from (only when input is SD). Can be any line
between line 7 and line 22. Default is line 19.
VITC_Ln_Ctrl
Here you can choose whether you want to select the line, to where
you want to copy the timecode data to, manually (
manual
) or use
the information in the
ATC_DBB
package to select the lines
(ATC_DBB package contains information about the line duplication
as well). Default is
Manual
.
VITC_Ln_625
When
VITC_Ln_Ctrl
is set to
Manual
, with this setting you can
select a line between 7 and 22 when the output is SD625. Default is
line 19.
VITC_Ln_525
When
VITC_Ln_Ctrl
is set to
Manual
, with this setting you can
select a line between 7 and 22 when the output is SD525. Default is
line 10.
VITC_Ln_Dup
When set to
On
, the VITC line is duplicated to the above selected
line + 2 lines.
Ins_CtrlA
With this item you select how the inserter presets are controlled:
Manually (
manual
), via GPI-triggers (
GPI
,
GPI-A
,
GPI-B
or
GPI-C
), via changes of the SD Aspect Ratio (
SD_AR
) or the HD
aspect ratio (
S2016)
(AFD)). Default is
Manual
.
Ins_Prst_ActA
With this item you can manually change the currently active preset
when in transparent mode. Can be any preset between 1 and 16. By
default it is set to 1. All menu settings that are preceded with a
‘
#Ins
’-prefix are part of the preset.
Содержание GFS010
Страница 1: ...INSTALLATION CONFIGURATION MANUAL GFS010 HFS010 SFS010 3GB S HD AND SD BASIC FRAME SYNCHRONIZER ...
Страница 13: ...EVS Broadcast Equipment SA 11 Block schematic ...
Страница 41: ......
Страница 42: ......