EVS GFS010, Руководство по установке и настройке

Страница: 16 / 42

INSTALLATION AND CONFIGURATION MANUAL
GFS010 – HFS010 – SFS010
14
Ref-Type
Sets the type of incoming reference. Can be either Bi-Level or
Tri-Level
. Default is
Bi-Level
.
P60-P50_Sync
With this setting you can choose to synchronize each
one frame
or each
two frames
. Default is
One Frame
. The two-frame-
synchronize mode only works for 720p60, 720p50, 1080p50 and
1080p60 standards.
ANC_BlankA
With this setting you can Blank the vertical ancillary data only (
V-
Only
), blank de horizontal ancillary data only (
H-only
) or blank
both vertical an horizontal ancillary data (
H_And_V
). You can also
choose to not blank any data (
Off
), which is also default.
Freeze_Mode
Freez_Mode
allows you to choose between storing a complete
Video
Frame
or
Field
(double written) in case of a video freeze.
The default setting is Field
PrstEditView
With this setting set to
Follow Active
, the edit preset settings
(like for instance
UP_Prst_editA
and
UP_Prst_editB
) will
follow the active preset when the active preset is changed. This to
avoid confusion when changing the active. Set to
Independent
the edit preset will not automatically follow active preset changes.
By default set to
Follow Active
.
PatternSpeed
Sets the speed of the test-pattern (see settings
Inp_SelA
and
Inp_SelB
) animation between 0 (still) and 15 (fast). Default is 1.
Input_loss_A
Input_loss_A
determines what the output of outputs A is in
case of lost input:

Freeze:
a capture of the last good field or frame.

Colorbar:
a color bar

Zoneplate
: a zone plate

Black:
a black output.

Grey:
a grey output.

Green:
a green output.

Freeze 1 sec:
a freeze of the last field or frame for 1
second. After 1 second the output framework is disabled.

Freeze 5 sec:
Same as Freeze 1 sec, only holding the
freeze frame/field for 5 seconds.
The default setting is
freeze
.