9
1. Backflow preventer
2. Buffer tank
3.
Pump
4.
Outlet pipe 1”
5.
Inlet pipe 1”
Pump suction from the buffer tank
Pump suction from the well ( maxim height suction 8m):
Starting the pump:
WARNING! DO NOT START THE PUMP WITHOUT WATER
Through the outlet hole (7) pour in clean water in the suction
pipe until the pump is fill with water.
Tighten the outlet pipe..
Plug the pump of the electrical network and press the
ON/OFF switch (5) from the side panel.
If the pump delivers water means you succeeded.
If the pomp don’t delivers water resume operations above.
Electrical connection
Is advisable to connect the pump to a dedicated grounded
power line.
These pumps with single-phase motor are provided with a built-in thermal overload
protection and could be connected directly to the power grid through the power cord
supplied (4)
Warning! If the motor is overloaded it stops automatically. Once it has cool down
it starts again automatically without requiring any manual intervention.
Cleaning and maintenance
Before performing any work on the equipment, pull the power plug.
Cleaning
Keep the ventilations slots of the machine clean to prevent overheating of the engine.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
1. Outlet pipe 1”
2. Well
3. Pump
4. Suction
5. Inlet pipe1”
