EVOnet VDVF430IR, Руководство пользователя

Страница: 46 / 62

Part 3 - Remote Setup
46
System Event
Select System Event and configure system event
settings. With system event enabled, system status,
alarm in status, and disk status will be checked
periodically and corresponding alerts will be generated.
IDVF320IR / VD320IR / IDVF430IR / VDVF430IR
ID420-FFIR4
•
System Alive
: Select to check the system status and
then set up a schedule.
- Send Email : Select to send out an email when the
system comes on line.
- Remote Callback : Select this option to send a
message to a remote system when the system
comes on line and then select which system to send
the message to.
-
Alarm In Bad
: Select to check the alarm in status
and then set up a schedule.
IDVF320IR / VD320IR /
IDVF430IR / VDVF430IR
-
Send Email
: Select to send out an email if no
change is detected in the alarm in status.
- Remote Callback : Select this option to send
a message to a remote system if no change is
detected in the alarm in status and then select
which system to send the message to.
-
Disk In/Out
: Select to check if the SD card has
been inserted/removed.
IDVF320IR / VD320IR /
IDVF430IR / VDVF430IR
-
Send Email
: Select to send out an email when the
SD card is inserted/removed.
- Remote Callback : Select this option to send a
message to a remote system when the SD card is
inserted/removed and then select which system to
send the message to.
•
Email
and
Remote Callback
settings under
Event
Action
must be configured correctly in order to
send out emails and messages.
• Remote Callback is not supported on WebGuard.
• The camera must be registered to the remote
system in order to use the Remote Callback feature.