Evolveo RoboTrex H5, Руководство пользователя, Страница: 26 / 29

DRY MOPPING

To remove fine dust and polish the floor.

Attach the mopping pad with the mop on the vacuum cleaner, use the two installation
holes "M" on the bottom of the vacuum cleaner.

Do not use the microfiber cloth for mopping uneven surfaces or carpets.
DESCRIPTION OF THE LED LIGHTS ON VACUUM
Status LED's
Charging Sequential flashing
Battery fully charged Off
Selected mode Slow flashing
Error All diodes are lit
Low battery The middle diode flashes
Return to the charging station mode The middle diode flashes slowly
Cleaning mode The middle diode shines
Perimeter cleaning mode The middle diode shines, the diode below
flashes
Spot cleaning mode The middle diode shines, the diode above
flashes
DESCRIPTION OF AUDIO SIGNALS
Short tone Cause Solution
o The front wheel or the
side brushes do not
work. Check the front wheel and the side brushes
and clean them.
o o Error of the bottom or
front sensor. Clean the bottom sensors; lightly press the
front bumper. Check there is no jammed
object.
o o o The vacuum cleaner
got jammed. Move the vacuum cleaner and continue
cleaning.
If the problem still occurs, check whether the battery is fully charged if it is, turn the
vacuum cleaner off and on again with the main switch.
CHARGING
If you want charge up the vacuum cleaner, press the "HOME" (8) button on the remote
control. The vacuum cleaner will search for the charging station and automatically and
start charging the battery. The blue LEDs on the vacuum cleaner flash while charging, the
LEDs go off when the battery is fully charged.
If the battery status is low, the vacuum cleaner will automatically search for the charging
station and start charging. Keep the charging station connected to the mains
continuously otherwise the vacuum cleaner will not be able to find it.