Evolveo RoboTrex H5, Руководство пользователя, Страница: 25 / 29

WET MOPPING

Attach the mopping pad with the mop on the vacuum cleaner, use the two installation
holes "M" on the bottom of the vacuum cleaner.

Remove the plastic cover and fill the plastic container with water without any
cleaning agents (250 ml maximum).
1 Water container opening cover 3 Opening for moistening the mop
2 Handle for removing the
container from the vacuum
cleaner
4 Water container opening

Moisten the XXL mop with water

Water should slowly drip from the left and right plastic parts.

Press on the "
::
" marking on the top the vacuum cleaner.
(Open/Close the cover), remove the dust container and insert the water container
instead.

The container should be properly inserted into its place in the vacuum cleaner.

Close the top of the vacuum cleaner.

Press the "CLEAN" button to start the wet mopping operation.

In this mode, the device does not vacuum, only the side brushes operate.

Water drips automatically, so do not let the vacuum cleaner stand motionlessly in one
place with remaining water in the container to prevent water spillage on the floor.

Do not use the microfiber cloth for mopping uneven surfaces or carpets.

Remove the water container when the mopping is done.

Do not charge the battery when the water container is inserted.