Evolve ELR055SGB Series, Руководство по эксплуатации продукта

Страница: 43 / 54

43
How long before I can use the product
?
In a normal ambient environment, your refrigerator should pull down to the target set point
within a couple of hours. It is common industry practice to monitor the unit over 48 hours to
ensure it is holding the set point temperature.
Why is there condensation building up on the walls
?
Condensation is completely normal in a cold wall refrigeration system.
Condensation occurs
when humid air cools when in contact with the cold walls and excess water vapor condenses
on the walls as droplets. There is an out-of-sight system that collects and evaporates the
excess runoff. You may see excess condensation during the initial cool down period.
Where can I find the Serial Number, the MAC ID, the IP address?
You can find your important and specific product information by accessing the control
interface. This important information includes: Product Serial Number, Model Number, MAC
ID, UI Firmware and TEC Firmware. (
Main Menu --> Settings --> System Information)
The product Serial Number can also be found on the shipping label (on the shipping box) and
on the product label (on the back of the unit behind the rear cover).
Is the unit calibrated? Can I calibrate my refrigerator?
The refrigerator can be ordered with a National Institute of Standards and Technology (
NIST)
certificate. To ensure proper calibration in the working environment, both the air & glycol
sensors can be calibrated. See the Calibration section for instructions.
What kind of refrigerator maintenance is required?
As a complete solid-state refrigeration system, there are no internal moving parts to be
serviced. Occasionally you will want to check the external fans for dust build up and clean as
necessary. Otherwise there is no maintenance required to keep the system working at peak
performance.
May
the units be placed in a Pyxis cabinet
?
As with any electrical or mechanical system, heat accumulation in a closed environment can
impact the cooling performance of the refrigerator. We recommend adequate ventilation in
the back wall of the cabinet to dissipate heat outside of the cabinet.