Evolve ELR055SGB Series, Руководство по эксплуатации продукта

Страница: 16 / 54

16
load the refrigerator, always remember to provide some clearance around the air and glycol
sensors and make sure the glycol sensor remains properly connected.
Make sure that when loading products to load the bottom shelf first, the middle shelf second
and then finish by loading the top shelf.
When loading products previously stored at room temperature, monitor the temperature
display to prevent a compromise. We suggest you load room temperature samples in small
increments to help maintain a stable temperature.
Do not load product until the preprogrammed set point is reached.
Always provide adequate clearance around both the air and glycol sensors.
Tips for Managing Door Openings
When a refrigerator door is opened, warmer ambient air enters and causes the interior
temperature to fluctuate. To limit this effect, there are a few simple steps you can follow to
reduce the number of times the door is opened as well as the duration it is left opened:
•
List a detailed inventory of the refrigerator’s contents on a chart posted outside the
unit to reduce the time spent searching for items when the door is opened.
•
Use clearly labeled bins to organize and quickly identify contents.
•
Avoid storing beverages or any non-sample items (like food) in any unit used for
sensitive inventory. Not only is this a health hazard, it also leads to more frequent
opening of the door.
Evolve compact refrigerators have a visible and an audible open door alarm
that sounds when a door has been open for more than 1 minute.
Automatic Defrost Cycles
The Evolve refrigerator will run a pre-programmed automatic defrost cycle every 24 hours.
During the defrost cycle you will likely hear the fan turning off and on. In addition to the
automatic defrost cycles, you can initiate a manual defrost cycle through the Settings menu.