Evolution FURYTWIN125, Оригинальное руководство пользователя

Страница: 4 / 44

4 www.evolutionproject.com
®
EC - DECLARATION OF CONFORMITY
EC - Declaration of Conformity 4
Important Information 4
12 Month Limited Warranty 5
General Safety Rules 5
Safety Instructions for all Saws 6
Symbols 7
Additional Specific Safety Rules
7
Specification 8
Assembly 8
Operation 8
Maintenance 10
Environmental Protection
10
Service Parts Lists 11
We, the importer
Evolution Power Tools Ltd.
Venture One
Longacre Close
Sheffield
S20 3FR
Declare that the product
Part numbers: FURYTWIN1251, FURYTWIN1252,
FURYTWIN1252EU
Evolution: Fury125mm (5˝) Twin Blade Cutter
Complies with the essential requirements of the following
European Directives:
2006/42/EC – Machine Directive
2006/95/EC – Low Voltage Directive
2004/108/EC – EMC Directive
2011/65/EC – Restriction of the use of Certain Hazardous
Substances in Electrical and Electric equipment.
These power tools have been designed in compliance with
the Council Directives:
2006/42/EC
2004/108/EC
2011/65/EU
2002/96/EC
The following standards have been applied:
EN55014-1
EN55014-2
EN61000-3-2 & EN61000-3-3
EN60745-1
EN60745-2-5
NOISE & VIBRATION DATA
LpA (sound pressure) dB(A) 90.0
LwA (acoustic power) dB(A) 101.0
KpA (sound pressure uncertainty)
dB(A) 3
KwA (acoustic power uncertainty) dB(A) 3
WEIGHTED RMS ACCELERATION VALUE
VIBRATION m/s
2
5.18
K m/s
2
1.5
The declared vibration value has been measured in
accordance with a standard test method (EN60745) and may
be used for comparing one tool with another. The declared
vibration value may also be used in a preliminary assessment
of exposure.
WARNING: The vibration emission value during actual
use of the power tool can differ from the declared value
depending on the ways in which the tool is used. Identify
safety measures to protect the operator that are based on an
estimation of the exposure in the actual conditions of use.
Take into account all parts of the operating cycle including
the times when the tool is switched off and when it is
running at idle in addition to actual trigger time.
Authorised Signatory
Date: 1/8/2010
Name: Mr Matthew J Gavins
Position: Managing Director
Year of Manufacture: 2010
IMPORTANT
Please read these operating and safety instructions carefully
and completely. For your own safety, before using this
equipment check that the voltage is correct and that all
handles and parts are firmly secured. If you are uncertain
about any aspect of using this equipment, please contact our
Technical Helpline.
Technical Helpline UK 0870 609 2297
Technical Helpline USA 1-866-EVO-TOOL
TABLE OF CONTENTS
GB
EC - DECLARATION OF CONFORMITY GB