Evolution FURY 52551, Оригинальное руководство пользователя, Страница: 8 / 24

8 www.evolutionfury.com
j) Connect the saw to a dust collection
device when sawing wood.
The operator
should be informed of the factors that
influence exposure to dust e.g. type of
material being cut and the importance of local
extraction (capture or source) and the proper
adjustment hoods/baffles/chutes.
k) Use proper extension cord. Make sure
any extension cord is in good condition.
When using an extension cord, be sure to use
one heavy enough to carry the current your
machine will draw. An undersized cord will
cause a drop in line voltage resulting in loss
of power and possible overheating.
l) Always use safety glasses. Also use a
face or dust mask if the cutting operation is
dusty. Everyday eyeglasses only have impact
resistant lenses, they are NOT safety glasses.
m) Maintain tools with care.
Keep
tools sharp and clean for best and safest
performance. Follow instructions for
lubricating and changing accessories.
n) Disconnect from the power supply
before servicing, cleaning or and when
changing accessories, such as blades.
o) Use recommended accessories. Only
use genuine Evolution accessories.
p) Check for damaged parts. Before further
use of the tool, a guard or other part that is
damaged should be carefully checked to
determine that it will operate properly and
perform its intended function - check for
alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any
other conditions that may affect its operation.
A guard or other part that is damaged should
be properly repaired or replaced.
q) Keep hands out of the path of the saw
blade.
r) Never reach around the saw blade.
s) Turn off machine and wait for saw
blade to stop before making any fence
adjustments.
t) Never pull or carry the tool by the
power cord.
Carrying or pulling the tool by
the power cord could cause damage to the
insulation or the wire connections resulting in
the possibility of electric shock or fire.
u) When transporting the machine use
a transportation device.
Never use the
guards for handling or transportation.
v) During transportation the upper part of
the saw blade must be lowered fully and
covered by the guard.
w) All operators using this machine must
read the instructions and familiarize
themselves with the machines workings.
x) Never leave the saw running and
unattended.
Do not leave the saw until the
saw has been switched OFF, and the blade
has come to a complete halt.
y) Rebating or grooving should not be carried
out unless suitable guarding, such as a
tunnel guard, is fitted above the saw table.
z) Saws shall not be used for slotting
(stopped groove).
SPECIFICATION FURY 255mm TABLE SAW
Voltage 230V ~50Hz
Input power 1500W
No load speed 2500min
-1
Blade diameter ø10˝ (255mm) TCT
Blade bore ø25.4mm
Blade kerf 2mm
Blade teeth 24T
Maximum depth of cut at 0
0
73mm
Maximum depth of cut at 45
0
54mm
Net weight 25kg
Riving Knife Thickness 1.8mm
NOISE AND VIBRATION DATA
Sound pressure level: 93.0dB(A)
Sound power level: 104.3dB(A)
Uncertainty K 3 dB(A)
ACCESSORIES
Table Extensions: 2pcs
Extension Table Support Struts:
4pcs
Blade Changing Tool: 2pcs
Mitre Gauge: 1pc
Anti-bounce device: 1pc
Adjustable Rip Fence: 1pc
Rear Cantilever Braces: 2pcs
Push Stick: 1pc
Fence Rail: 2pc
Table Saw Stand (When Assembled): 1pc
Allen Key 1pc
Spanner 1pc
Fence Locating Bar
1pc