Evolution evotherm EFI Ultra V30T, Инструкция по установке и эксплуатации

Страница: 34 / 48

31
Note:
Click the device to check the status, and you can set the operating mode, ON/OFF, timer.
Click “
＋
” to add devices.
3. Wi-Fi Module configuration steps:
Method 1
Step 1:
When power is on, if there is no distribution network, it will automatically connect through the EZ
mode by default. At this moment, the indicator light under “ ” flashes rapidly (2 times per
second), mobile phone can connect it.
Manually enter the EZ mode: 10s after power on, long press on “ ” for 3s to enter EZ mode, the
the indicator light under “ ” flashes rapidly (2 times per second), mobile phone can connect it.
Step 2:
Turn on the phone's Wi-Fi function and connect to the Wi-Fi hot-spot. The Wi-Fi hot-spot must
be able to connect to the Internet normally;
Step 3:
Open the "smart life" APP, log in into the main interface, click on the top right corner "+" or "add
equipment" of the interface, enter the equipment type selection, the "Large Home Appliances" ,
select "Smart Heat Pump" equipment and add equipment into the interface.