Evolution BLACK255 SPECIAL EDITION Скачать руководство пользователя страница 20

STEALTH

255

255

38

39

www.evolutionpowertools.com

EN

FR

DE

NL

IT

JP

www.evolutionpowertools.com

The manufacturer of the product covered by this Declaration is:  

Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR. 

The manufacturer hereby declares that the machine as detailed in this declaration fulfils all 
the relevant provisions of the Machinery Directive and other appropriate directives as detailed 
below. The manufacture further declares that the machine as detailed in this declaration, where 
applicable, fulfils the relevant provisions of the Essential Health and Safety requirements.

The Directives covered by this Declaration are as detailed below:

2006/42/EC 

 

Machinery Directive.

2006/95/EC.

  

Low Voltage Equipment Directive.

2004/108/EC.

   Electromagnetic Compatibility Directive,

93/68/EC. 

 

The CE Marking Directive.

2011/65/EU. 

 

The Restriction of the Use of certain  

 

Hazardous Substances in Electrical Equipment (RoHS) Directive

2012/19/EU. 

 

The Waste Electrical and Electronic Equipment (WEEE) Directive.

And is in conformity with the applicable requirements of the following documents

EN61029-1  /  EN61029-2-9  /  EN55014-1  /  EN55014-2  /  EN61000-3-2 
EN61000-3-3  /  EN60825-1

The technical documentation required to demonstrate that the product meets the requirements of 
directive has been compiled and is available for inspection by the relevant enforcement authorities, 
and verifies that our technical file contains the documents listed above and that they are the correct 
standards for the product as detailed above.

Name and address of technical documentation holder.

Signed: 

 

Print: Steven Bulloss: Operations Director                                                              

Signed:  

 

Print: Lettie Lui: Product Manager 

 
Date: 28/05/12

Evolution Power Tools, Venture One, Longacre Vicino, Holbrook Industrial Estate, Sheffield S20 3FR

product Details

Description:  

RAGE3-S/STEALTH 210mm TCT Multipurpose Sliding Mitre Saw 

Evolution Model No:   030-0001 / 030-0002 / 030-0004 / 030-0010 / 030-0011 /  
 

 

030-0012 / 030-0013  

Factory Model No:  

JIxL-DU05-210 / J1xL-DU03-210

Brand Name:  

EVOLUTION

Voltage:    

230V~50Hz; 110V~50/60Hz

Input:  

 

1500W

product Details

Description:  

RAGE3-S300 210mm TCT Multipurpose Sliding Mitre Saw 

Evolution Model No:   RAGE3S3001 / RAGE3S3002 / RAGE3S3002EU    
Factory Model No:  

JIxL-DU05-210

Brand Name:  

EVOLUTION

Voltage:    

230V~50Hz; 110V~50/60Hz

Input:  

 

1500W

product Details

Description:  

RAGE3/STEALTH/BLACK  

 

 

 

 

 

255mm TCT Multipurpose Sliding Mitre Saw 

Evolution Model No:   040-0003 / 040-0004 / 040-0010 / 040-0011 / 040-0012 / 040-0013  / 040-0003A 
Factory Model No:  

JIxL-DU05-255

Brand Name:  

EVOLUTION

Voltage:    

230-240V~ 50Hz

Input:  

 

2000W

EC DECLARATiON OF CONFORMiTY

Содержание BLACK255 SPECIAL EDITION












































Отзывы: