4
26
l
It is imperative that the printer is cleaned.
See section 3 - Maintenance
l
Card jammed in the printer.
l
Mechanical component fault.
Press the control button for one second. If the problem persists,
contact your Evolis dealer for assistance.
l
The magnetic strip is facing the wrong direction in the feeder.
l
The encoding type is incorrectly configured (HICO or LOCO).
l
The encoded data does not comply with ISO 7811 standards
or with the settings predefined in the print driver properties.
Refer to Appendix C of this manual for further information.
Press the control button for one second. The printer will restart
the magnetic encoding cycle with a new card. If the problem
persists, call your Evolis dealer for assistance.
CLEANING
(after 500 cards
have been inserted)
MECHANICAL
PROBLEM
MAGNETIC
ENCODING ERROR
l
The cooling system has been activated.
The printer pauses for a few seconds and restarts once it has
returned to its normal operating temperature.
COOLING MODE
l
The printer must be cleaned.
See section 3 - Maintenance
CLEANING
(after 400 cards
have been inserted)
