67
PRiMAcy 2
Replacing the print head
The print head is a sensitive component of the printer. it determines the print quality. A regular cleaning and an environment free from dust or other
particles ensure a lengthy useful life. See “Print head cleaning”, page 54 to clean the print head.
in case the user needs to replace the print head, Evolis designed a unique device that requires no tools for the replacement.
Before replacing the print head, contact your Evolis dealer. The dealer can give advise and supply a new print head if necessary.
NOTE
For more information on print head warranties, refer to the Evolis warranty available on
.
!
Unplug the printer before replacing the print head.
Avoid touching print heads with bare hands.
Follow the instructions carefully.
Removing the defective print head
1
Open the printer cover.
2
Locate the print head.
3
Press on the plastic part behind the print head
(pressure plate)
1
.
4
Pull on the print head with the other hand as
shown to free the lugs from the holding fork
2
.
5
Remove the lugs from their slots.
6
Tilt the head carefully downwards and disconnect the connector linked to the cable.
Avoid forcing the mechanism.
