manualshive.com logo in svg

Evolis PRIMACY 2, Руководство пользователя

Поделиться
Скачать
Evolis PRIMACY 2 Скачать руководство пользователя страница 51

51

PRiMAcy 2

REGULAR PRiNTER cLEANiNG

Printer cleaning

NOTE

Recommended cleaning cycle: whenever the ribbon is changed.
Mandatory cleaning cycle: when the cleaning warning is triggered.

Servicing accessory: adhesive cleaning card.

!

The cleaning warning system of the printer is triggered after a certain number of inserted cards.
Proceed with the regular cleaning of the printer as soon as the warning is triggered.
The print head warranty is directly linked to regular cleaning of the printer. if the regular cleaning is not performed and if the 
warning light remains ON, the print head warranty is automatically voided due to a failure to comply with contractual maintenance 
obligations.

Printer

cleaning required after:

(warning light flashing)

Number of cards remaining before 

warranty voided:

(warning light flashing)

Warranty invalid after

(warning light steady)

Primacy 2

1000 cards

200 cards

1200 cards

For more information, refer to the 

Cleaning kit safety datasheet

.

Follow the procedure to ensure regular cleaning is performed properly:
Repeatedly running the adhesive card through the printer cleans the cleaning roller in order to maintain print quality and increases the service life of 
the print head.

Содержание PRIMACY 2











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды