Step 2 - Installing the new print head
5. Fit in the the head horizontally by inserting the ball into
its seat.
6. Turn the print head in order to insert the lugs into the
lateral forks of the head bracket.
7. The head is put back in place.
8. Close the cover. The new print head is now installed.
1. Note the code indicated
on the white ticket affixed
to the print head. You
will be asked for this
code in Step 3.
2. Pick up the new
print head and
turn it toward
you, with the
white connector
visible.
3. Connect the cable into its
seat, making sure it is in
the correct direction. Do
not force the mechanism,
as this part is relatively
sensitive.
4. Turn the head so
that the notice is
visible: the
connector is no
longer visible.
32
Step 3 - Setting the parameters of the new print head
1. Power up the printer and make sure it is properly connected to a computer
on which Tattoo print driver is installed.
2. Under print driver “Properties”, click on the “Tools” dialogue box.
3. In the “Bi directionnal communication” portion, enter the following command: Pkn;x
X = the print head kit number that you read in Step 2
Example: if the print head kit number is: 379-D760 2028-D, you must enter the command:
Pkn;379-D760 2028-D
If the print head kit number is not entered correctly, printer malfunctions can occur and the
warranty may be canceled.
