23
State of the lights
Interpretation
Solution or explanation
■
The printer must immediately be
cleaned.
Go to chapter 4 “Servicing and
Maintenance”.
■
The printer cover is open.
Close the cover of the printer.
The activity in course restarts.
■
There is a card jammed in the
printing station.
■
A mechanical part in the printer
is faulty.
Press the push button for one second.
If the problem persists, call your Evolis
reseller for assistance.
■
The orientation of the magnetic
track in the feeder is not correct.
■
The type of encoding has not been
correctly parameterised (HICO or
LOCO).
Go to Chapter 5 of this
manual for more information.
■
The encoded data do not conform
to ISO 7811 or to the parameters
pre-defined in the properties of the
driver.
Go to Chapter 5 of this
manual for more information.
Press the push button for one second.
The printer restarts the magnetic
encoding cycle with a new card.
Please check the data & parameters,
if the problem persists, call your
Evolis reseller for assistance.
■
The print head cooling system is
activated.
The printer stops working for a few
seconds. As soon as the print head
reaches the normal working tempe-
rature, the activity starts once more.
PRINTER CLEANING ALERT
(AFTER 500
INSERTIONS)
PRINTER COVER OPEN
MECHANICAL PROBLEM
ENCODING ERROR
COOLING MODE
