evoheat Solace 1.25, Руководство по установке и эксплуатации

Страница: 12 / 20

5.2 Operation Instruction
5.2.1 Unit ON/OFF
You can turn ON/OFF the unit by just pressing " " when the unit is connected to the power.
When the unit is turned on, you can see the actual relative humidity shown on the display. At
the same time, the mode indicator and the light for the ON/OFF button will be on.
Press " "to turn
the unit ON/OFF
OFF
ON
5.2.2 Set the target value of relative humidity
Press" "
or " "
to check the
target relative
humidity
ÖÈ ÖÀ µ· Ö·
11
ÖÈ
ÖÀ
µ·
%RH
ÖÈ
ÖÀ
µ·
%RH
Actual relative humidity
The selected mode
ÖÈ
ÖÀ
µ·
%RH
ÖÈ
ÖÀ
µ·
%RH
Press " "
or " " again
to change the
target relative
humidity
ÖÈ
ÖÀ
µ·
%RH
Tips£
1. After the target value has been changed, if there is no operation in 5s, the value will be saved
and the controller will be back to the main interface.
2. After the target value has been changed, when the unit is restarted, system will operate at
the new target value.
5. Usage
Actual relative humidity
of room air
Target relative humidity
5. Usage
5.1 Instruction for Operation Panel
ÖÈ
ÖÀ
µ·
5.1.1 Buttons
ON/O FF
Pre ss th is butto n to tu rn th e unit on/o ff.
UP
Pre ss th is butto n once to check th e ta rg et setti ng value of re lati ve humidity ;
Pre ss it again can incre ase th e ta rg et setti ng value.
DOWN
10
%RH
Defrosting
Dehumidifying
Pre ss th is butto n once to check th e ta rg et setti ng value of re lati ve humidity ;
Pre ss it again can decre ase th e ta rg et setti ng value.
Tips:
When the unit is switched on, "8.8" will firstly be shown on the display. Then "1.0" will be
shown which stands for the version of the program. After that, you will find actual relative
humidity of the room air on the display.