Operating instructions EcoStar 530 F-M
Datei:1_EcoStar530F-M_9662597_Betriebsanleitung_EN_2009-05.doc
Update: 2012-12-18, S. 34 , 40
9662597
23/42
W e reserv e the right to change ex ecution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
14 Tips for self-help in the case of faults
Fault:
Remedy
Machine does not fill.
No water available
Dirt trap blocked
Level switch defective
Solenoid valve defective
Door safeguard defective
Rinse water does not
spray!
No water available
Dirt trap blocked
Solenoid valve defective
Booster pump has failed (with air gap)
Fresh water rinse system furred
Stripes and smears on the
dishes!
Rinse water mineral content too high (see operating
instructions)
If this is observed only at particular times, check water
softener for regeneration. This must not carried out
during the dishwashing operation.
Water pre-treatment defective or not carried out
Different water type depending on the waterworks
Unsuitable rinse aid products or wrong dosage quanti-
ty
Formation of a significant
amount of foam in the
wash tank!
Detergent for dish-washing by hand enters the wash
tank because of pre-cleaning the dishes
Daily cleaning is carried out with foaming cleansing
agents which afterwards enter the machine.
Improve pre-wash, as too much food residue is enter-
ing the tank. Alternatively, empty wash tanks between
uses.
Rinse water quantity too low
Detergent or rinse aid product not suitable
Temperatures too low < 40°C