Operating instructions EcoStar 530 F-M
Datei:1_EcoStar530F-M_9662597_Betriebsanleitung_EN_2009-05.doc
Update: 2012-12-18, S. 34 , 40
9662597
22/42
W e reserv e the right to change ex ecution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
The correct dosing results in a smooth, even water film.
In case of overdosing, there are bubble and stripe formations - reduce dosing.
In case of under-dosing, water drops remain on the washed items - increase dosing.
12.1.7 Airbox AktivAir
After the wash is finished the extraction fan is switched on for three minutes. The time can
be set using a time relay. Times shorter than three minutes should not be set because oth-
erwise residual moisture would stay in the housing and possibly damage the fan motor
12.2 Noise level
Work place noise level L
pA
70 dB
12.3 Data reg. the electrical and hydraulic equipment
See attached technical sheet
12.4 Dimensions, technical data, installation instructions
See attached technical sheet
13 Non-ionizing radiation
Non-ionizing radiation is not produced intentionally but unfortunately comes about due to
electrical operating equipment (e.g. electrical motors, high-voltage cables and magnetic
coils). In addition the machine has no strong permanent magnet. There is a high possibil-
ity of eliminating the influence of active implants (e.g. pacers, defibrillators) by maintaining
a safety distance of 30 cm (distance of the field source to the implant).
