Evoca Group Snakky SL, Инструкция по установке, эксплуатации и обслуживанию

Страница: 25 / 64

21
© by NECTA VENDING SOLUTIONS SpA 0303 204-00
“Temperature”
The value of temperature detected by the probe is dis-
played.
In the event of disconnection the value -11.0 is displayed.
In the event of a short-circuit the value 41.0 is displayed.
Press “ ” to advance.
“Buzzer”
A series of sounds is emitted.
“Compressor”
The compressor is activated/deactivated using the “ ”
and “ ” keys.
“Selections”
All selections are activated in a sequence.
“Photocells”
If the product detection device is present, the light beam
reading and interruption are checked.
“Disp compt lock”
If the device for locking the dispensing compartment
opening, use the “ ” and “ ” keys to lock and unlock the
compartment opening.
MACHINE INFORMATION
The machine can memorize a series of codes which will
identify it when retrieving statistics.
More specifically the following can be stored:
- 6-digit operator code;
- 8-digit vending machine code which identifies the
machine.
INSTALLATION DATE
This function is used to store the current date of system,
if set correctly, as installation date.
The date is printed when retrieving the statistics.
MACHINE CODE
When the “Machine code” function is displayed the eight-
digit numeric code identifying the machine can be changed
(from the default 0).
OPERATOR CODE
When the “Operator code” function is displayed the six-
digit numeric code identifying groups of machines can be
changed (from the default 0).
EVADTS CODES
The EVADTS (European Vending Association Data Trans-
fer System) communication protocol has two codes for
identifying the machine and for recognising the data
transfer terminal:
PASS CODE
It is a four-digit alphanumeric code (0-9; A-F) that must be
the same as the one in the data transfer terminal to allow
its identification.
Press the confirm key “ ” and the code is displayed as
“0000” regardless of the actual value; then press the
correction key “ ” and the first digit will start blinking.
Using the scrolling keys, its value can be changed (during
the change operation the value becomes visible).
Press the change key “ ” and the next digit starts blinking.
Press the confirm key “ ” after changing the fourth digit;
the value is stored and the display indicates “0000” again.
SECURITY CODE
It is a further alphanumeric code for reciprocal recognition
between machine and EVADTS terminal.
Programming works as in the “Pass” code.
Connection
This function places the machine in wait mode for connec-
tion to retrieve data.
EVADTS CONNECTION
When activating this function, the machine awaits the
connection with a device to acquire the EVADTS statis-
tics.
INITIALISING
When the “Initialise” function is displayed the vending
machine can be initialised, selecting the “country” (in-
tended as configuration type) and the language, restoring
all related default data.
This function should be used in the event of a memory data
error or when the software version is replaced/updated.
All statistic information will be reset.
Press confirm key “ ”; the country and the language to be
used are requested, then the message “Confirm?” is
displayed. Press confirm key “ ” a second time and the
message “Working” is displayed for a few seconds.