Evoca Group Snakky SL, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 64

15
© by NECTA VENDING SOLUTIONS SpA 0303 204-00
TEST
SELECTIONS
This function is used to simulate the normal dispensing of
products without inserting any money to check the func-
tioning of the spiral rotation by pressing the selection keys.
MOTOR TEST
It activates all motors in a sequence, indicating on the
display the number of the involved selection.
AUTOTEST
A function to check, in a semiautomatic manner, the
correct operation of some devices is implemented in the
software.
Some checks occur automatically, others need the manual
operation of the monitored component; press key “ ” to go
to the next check.
The monitored devices are:
“Temperature”
The value of temperature detected by the probe is dis-
played.
In the event of disconnection the value -11.0 is displayed.
In the event of a short-circuit the value 41.0 is displayed.
Press “ ” to advance.
“Buzzer”
A series of sounds is emitted.
“Compressor”
The compressor is activated/deactivated using the “ ”
and “ ” keys.
“Selections”
All selections are activated in a sequence.
“Photocells”
If the product detection device is present, the light beam
reading and interruption are checked.
“Disp compt lock”
If the device for locking the dispensing compartment
opening, use the “ ” and “ ” keys to lock and unlock the
compartment opening.
EVADTS TRANSFER
When activating this function, the machine awaits the
connection with a device to acquire the EVADTS statis-
tics.