EVOC MEC-5031-M Series, Руководство пользователя

Страница: 203 / 205

Appendix
MEC-5031-M SERIES · 97 ·
Cold Reset
Cold Reset is a boot sequence. When the PC is powered on, it is to be booted up. In
e cold reset sequence, the system usually executes a couple of basic hardware
operating system from hard drive to working memory -> boot.
local modules, expansion modules, interfaces or mass storage (mass storage module).
to fix the module and ensure safe contact and transportation.
heavy modules. Therefore, it is
recommended to use module bracket for this type of module. There are also short,
t modules on the market. Module bracket is not designed for these
Warm Reset
e computer after the program is interrupted. Load and reboot the operating
xecute warm reset.
Hots ap
r hard drive system of the device. The
prerequisite of the configuration is a RAID1 system with SATA RAID controller
th
checks, then load the
Module
Modules refer to PLC, programming device or plug-in unit. These modules can be
Module Bracket
Module bracket is used
Impact and vibration especially affects large and
light and compac
modules, because standard fixing measures are sufficient for them.
Reboot th
system again. Hot key CTRL+ ALT+ DEL can be used to e
Drivers
Program part of operating system. They modify user program data according to
specific format required by I/O devices (e.g. hard drive, printer and monitor).
w
SATA interface provides hotswap function fo