EVOC MEC-5031-M Series, Руководство пользователя

Страница: 133 / 205

Software Introduction
MEC-5031-M SERIES · 27 ·
6.3.2 Function
1. We
After
lcome Interface
the software is opened, the following welcome interface will appear:
2. Watchdog (WDT)
The effect of Watchdog is shown in the picture below.
Using method: First carry out setup. The mode is reset mode; counting unit can be
d; timeout can be any figure within 1-255. After the setup is finished,
press “S
shows the
PC re
restar
Watc
Watc feed watchdog” option is selected, when the counted
time is less than 3 seconds, Watchdog will be automatically fed.
operated, and carry out reset
for abnorma atchdog cannot be fed
minute or secon
tart” button on the left, and Watchdog starts counting down. “Current time”
current time for counting-down. Counting-down in reset mode means the
boots at 0. During counting-down, “Feed Watchdog” button can be pressed to
t counting-down from the set timeout time. Press “Stop” button to stop
hdog. Exiting the program when Watchdog is counting down will also stop
hdog. If “Automatically
Function: Monitors whether the system can be normally
lity. When abnormality occurs to the system, W