EVOC MEC-5031-M Series, Руководство пользователя

Страница: 140 / 205

Software Introduction
· 34 · MEC-5031-M SERIES
default and the last hard disk is set as the secondary disk of the PC.
4. In MEC-5031-M SERIES, each storage device shall have two partitions, to
ensure the successful operation of system backup and recovery.
5. The file system in the partition of the backup disk can differ from that of the
recovery disk; however, the file systems other than FAT32 /NTFS /EXT2 /EXT3
/EXT4 are unsupported.
6. Please make sure the backup image files are ready when implementing recovery
for the first time (that is to say, the data shall be backed up following the
foresaid steps). Otherwise, the recovery is invalid.
d the BOOT option in BIOS Setup interface, set the EVOC Backup
function is enabled by default.
p & recovery interface.
backup and recovery interface.
B. Operating Steps:
1. Enable or disable EVOC One-key Recovery Function.
Press “DEL” key to enter the BIOS Setup interface after the power-on interface
appears.
(1) Fin
option to [Enable] or [Disabled] the EVOC One-key Recovery Function.
This
2. Enter system backu
When EVOC One-key Recovery function is enabled, it will prompt “Please Press
button <RCV> for System Recovery within 3 Seconds!!”; at that time, press the
button <RCV> at the back of the panel PC within 3 seconds and the system will
enter system