48
49
In the display, bars for heating phases are displayed
whenever the set temperature for the period is high-
er than the set reduction temperature.
If you want a room (e.g. the bathroom) to also be heated
during lunchtime the programming could look as follows:
Monday - Sunday:
from 00:00 to 06:00 15.0°C
from 06:00 to 09:00 23.0°C
from 09:00 to 12:00 17.0°C
from 12:00 to 14:00 19.0°C
from 14:00 to 18:00 17.0°C
from 18:00 to 22:00 21.0°C
from 22:00 to 23:59 15.0°C
17.2 Switching time/day (t-d) display
The factory setting will show the time on the display. In the
menu the display can be switched to the date.
• Open the configuration menu by pressing the menu but-
ton for more than 3 seconds.
• Select the “t-d” menu item with the (
+
) and (
-
) buttons and
confirm with the OK button.
• Now set the format you want to show on the display
(date and time will switch on the display) with the (
+
)
and (
-
) buttons.
• Confirm setting with the OK button.
•
•
17.3 Switching nominal/actual temperature (S-A)
In the factory settings, the display will show the nominal
temperature. In the configuration menu, you can change
the display setting from nominal to acutal temperature.
• Open the configuration menu by pressing the menu button.
• Select the (
S-A
) menu item with the (
+
) and (
-
) buttons
and confirm with the OK button.
• Now set the format you want to show on the display („
SEt
“
for the nominal temperature and „
ACt
“ for the actual tem-
perature) with the (
+
) and (
-
) buttons.
• Confirm setting with the OK button.
If the actual temperature is selected,
the display will disbplay „SEt“ for 5
seconds on change of the nominal
temperature (or on change of mode).
Afterwards, the display automatically
changes back to actual temperature.
17.4 Comfort and reduced temperature (
)
The comfort ( ) and reduced ( ) temperature buttons
make switching between comfort and reduced temperature
simple and user friendly. The factory setting for the comfort
temperature is 21.0°C and the reduced temperature 17.0°C.
When using EVN SmartHome without Cube, the comfort
and reduced temperature can be changed via correspon-
ding buttons as follows:
• Press the comfort ( ) / reduced ( ) temperature button
for a few seconds.
• The display shows the respective symbol and the corre-
sponding comfort or reduced temperature.
• Change the temperature with the (
+
) and (
-
) buttons.
• Confirm setting with the OK button.
Содержание SmartHome Wandthermostat Plus
Страница 30: ...58 59...
Страница 31: ...60...
