EVN SmartHome Wandthermostat Plus, Руководство по эксплуатации

Страница: 22 / 31

42 43
11. Teaching-out of wireless components (UnL)
During operation with the EVN SmartHome Cube, the
EVN SmartHome Wall Thermostat end the other devices
are taught out via the local EVN SmartHome Software in
the respective room.
During operation without the EVN SmartHome Cube you
use the „UnL“ function in the menu in order to unteach de-
vices that have been taught in at the EVN SmartHome Wall
The (e.g. EVN SmartHome Radiator Thermostat).
All radio components are untaught simultaneously.
To unteach, proceed as follows:
• Select the “UnL” menu item with the (+) and (-) buttons.
• Confirm the setting with the OK button.
• “ACC” will show on the display.
• Confirm with the OK button.
After the „UnL“ function all connection partners are dele-
ted from the EVN SmartHome Wall Whe ; facto-
ry setting is not mandatory.
12. Display content during normal operation
During normal operation, the operating mode, weekday,
nominal temperature, time, radio synchronicity and swit-
ching periods are displayed.
The bars for switching periods of the week programme are
displayed for each time interval for which the nominal tem-
perature is above the reduced temperature. An example
can be found in sec. 17.1.1.
13. Operating modes
(Auto / Manu / Holiday function / Boost)
You can choose between the operating modes auto, manu
and holiday function:
Auto: Week programme – automatic temperature control
according to stored week programme.
Manu: Manual operation – the temperature is set manu-
ally with the ( + ) and ( - ) buttons.
Holiday function ( ): Setting a temperature that
should be held until a fixed end time.
Boost (
BOOST
): Set boost funkction (sec. 17.5)
You can configure the settings for the operating modes
comfortly via the local EVN SmartHome Software, when
operating the system with EVN SmartHome Cube.
During operation without EVN SmartHome Cube, you
can change between the funtions by pressing the mode
button shortly.
If the operating mode or the temperature on one de-
vice in the room is changed, all taught-in radiator
thermostats will adjust to this setting.
14. Child-proof lock / operating lock ( )
Operation of the device can be locked to avoid unintended
changes through involuntary touch. To (de)activate the
operating lock proceed as follows:
• Briefly press the Mode and the OK button simultaneously.
• Once activated, the operating lock symbol ( ) is shown
on the display.