Evident Olympus SZX2-ILLTQ, Инструкция по эксплуатации

Страница: 8 / 36

4
Preventing eye injuries
· Do not look directly at the LED light for a long time.
The LED built in this product is basically eye-safe. However, do not look directly at the light for a long time,
since it may cause damage to your eyes.
· When using SZX2-ILLTQ (Quad position LED transmitted light illumination base), attach the dummy
cap provided with the base to the illumination cartridge mount where the illumination cartridge is not
attached.
CAUTION
Electric safety
· Always use the power cord provided by Olympus.
If the proper AC adapter and the power cord are not used, the electric safety and the EMC (Electromagnetic
Compatibility) performance of the product cannot be assured. If no power cord is provided, please select the
proper power cord by referring to the section “Proper selection of the power cord” at the end of this instruction
manual.
· Always connect the ground terminal.
Connect the ground terminal of the power cord and that of the power outlet.
If the product is not grounded, our intended electric safety and EMC performance of the product cannot be
assured.
· Do not use the product in close proximity to the sources of strong electromagnetic radiation.
Proper operation may be interfered. The electromagnetic environment should be evaluated prior to operation
of the product.
· Disconnect the power cord in case of emergency.
In case of emergency, disconnect the power cord from the power cord connector on the product or from the
power outlet.
Install the product at the location where you can reach the power cord connector or the power outlet at hand
to disconnect the power cord quickly.
· Do not connect or disconnect the power cord, cables and products (optional) while the power is on.
CAUTION
Prevention of electric shock
· Never disassemble each part of this product.
It could cause electric shock or failure of the product.
· Do not touch the product with wet hands.
In particular, if you touch the main switch of the power unit or the power cord with wet hands, electric shock,
ignition or failure of the product may be caused.
· Do not pull or tie the power cord/cables in a bundle.
Otherwise they could be damaged, causing a fire or an electric shock.
WARNING